New vs. Used Restaurant Equipment: What to Buy Used and What to Buy New
Which restaurant equipment is usually safe to buy used, what to inspect, and which pieces Q sells new only.
Opening or expanding a restaurant takes a lot of equipment, and buying used is one of the most common ways operators stretch a budget. Used can be a smart buy, but not for every piece. Trade publication Foodservice Equipment & Supplies (FE&S) has interviewed service technicians who repair this equipment every day, and their advice comes down to a simple rule: the simpler the equipment, the better it holds up secondhand.
Q Restaurant Supply sells new and used equipment across most categories, so we can help you compare both options side by side in our Irving showroom. Call (945) 394-0396.
The basic rule: simple equipment buys well used
In FE&S, service company owner Glen Clark describes simple gas cooking equipment (griddles, ranges and ovens) as the best bets on the used market. He calls it "fire in a box." These units have few components, so there’s less to fail.
The risk climbs as equipment gets more complex. Clark notes that electric hot-side equipment has more parts than gas, and that machines relying on several inputs are riskier still. Dish machines need electricity and hot water. Ice makers need electricity, refrigeration and filtered water.
A refrigeration service manager interviewed by FE&S, Donald Jones, makes the same point. Equipment that uses water, such as steamers, combi ovens and ice machines, may carry scale and lime buildup that’s hard to judge from the outside, especially if it ran on hard water. He’s also cautious about anything with a control board, which can look fine but fail expensively.
Usually good candidates for used
- Ranges — see our ranges
- Griddles — see griddles
- Standard ovens, such as deck and basic convection ovens — see ovens
- Stainless work tables, sinks and shelving, which have no moving parts
- Charbroilers, hot plates and stock pot ranges
- Heavy-duty mixers and slicers from established brands, inspected carefully
Inspect closely, or consider new
These can still be good used buys, but they deserve a closer look:
- Refrigeration (reach-ins, freezers, prep tables). Compressor wear is hard to see. Jones suggests shining a light through the condenser coil. If light passes through cleanly, the unit was probably cleaned regularly.
- Ice makers, because water, scale and refrigeration all affect how they perform.
- Dishwashers, because water, heat and chemicals put them through a lot.
- Fryers. FE&S notes that a leaking tank, often signaled by hardened oil under the fryer or behind the door, usually means the fryer needs replacing.
- Combi ovens, steamers and anything computer-controlled.
What Q sells new only
Some equipment just makes sense new. At Q, walk-in coolers and freezers and kitchen hoods are sold new only, and we install both:
- Walk-ins: Q installs the walk-in. Permits, electrical and concrete aren’t included.
- Ventilation hoods: Q installs the hood only. Ductwork, makeup air, fire suppression and permits aren’t included.
How to inspect used restaurant equipment
Treat it like buying a used car. These tips come from the service experts FE&S interviewed.
Look it over
- Dents, rust and corrosion are red flags (Jones).
- Missing knobs and torn gaskets suggest the unit wasn’t cared for, no matter how clean it looks (Clark).
- Inside the cooking chamber or oven cavity, you can see how well the previous owner maintained it.
- Refrigeration condenser coils should be clean enough to see light through.
- On water-using equipment, look for scale and dried, cracked seals.
Ask questions
- What’s the brand and model, and how old is it? The serial number often shows the manufacture date.
- Where did it come from, and how was it used?
- Is there any service history?
- Are parts still available for this model?
- What warranty, if any, comes with it?
Check that it fits your space
- Utility match: gas type (natural or LP), voltage and phase need to match your building.
- Size: measure your doorways and the space, and leave room for any required clearances.
- Ventilation: fryers, ranges, griddles and charbroilers generally need to go under a hood. FE&S notes fryers need a ventilation hood to handle grease and smoke.
Get a professional opinion
Both FE&S sources recommend having a qualified service agent look at a used unit, ideally before you buy and again when it’s installed. Clark suggests a company affiliated with the Commercial Food Equipment Service Association (CFESA). As Jones put it, a service call up front is far cheaper than a major repair later.
Note on installation: apart from walk-ins and hoods, Q doesn’t install equipment or do gas hookups. Use a licensed plumber or gas technician for gas lines, and a licensed electrician for electrical.
Think about total cost of ownership
FE&S’s experts warn that used equipment generally has a shorter remaining life, may not come with a manufacturer’s warranty, and an older unit may use more energy and need more maintenance. A newer unit may also qualify for ENERGY STAR. ENERGY STAR reports that certified commercial gas fryers are about 30% more energy efficient than standard models, and certified commercial refrigerators and freezers average about 20% more efficient.
Weigh what you’ll spend on utilities and maintenance over the years, not just the purchase.
A balanced approach many operators use
- Buy used where equipment is simple and durable: gas ranges, griddles, basic ovens, tables, sinks and shelving.
- Inspect carefully, or buy new, for refrigeration, ice, dish and computer-controlled equipment.
- Buy new for walk-ins and hoods, which Q only sells new.
- Mix and match as your budget and timeline allow.
Every kitchen is different, so walk the showroom and compare new and used units in person.
Compare new and used at Q
Call (945) 394-0396 or visit the Q Restaurant Supply showroom in Irving, TX to see new and used cooking equipment, refrigeration and more.
Sources
- Foodservice Equipment & Supplies, "Know What to Look for When Purchasing Used Equipment": https://fesmag.com/serviceinsights/23683-know-what-to-look-for-when-purchasing-used-equipment
- Foodservice Equipment & Supplies, "Buying Used Foodservice Equipment Means Doing Legwork": https://fesmag.com/topics/trends/15001-buying-used-foodservice-equipment-means-doing-legwork
- Foodservice Equipment & Supplies, "All About Fryers": https://fesmag.com/products/guide/cooking-equipment/fryers/23924-all-about-fryers
- ENERGY STAR, Commercial Fryers: https://www.energystar.gov/products/commercial_fryers
- ENERGY STAR, Commercial Refrigerators & Freezers: https://www.energystar.gov/products/commercial_refrigerators_freezers
Frequently asked questions
Is it safe to buy used restaurant equipment?
Yes, if you choose the right pieces and inspect them. Simple gas cooking equipment and stainless fabrication tend to be the safest used buys.
What restaurant equipment should I buy new?
Service experts are most cautious about used equipment with water lines, refrigeration or control boards, such as ice makers, dish machines and combi ovens. At Q, walk-ins and hoods are sold new only.
Does Q sell used ice makers?
Yes. Q sells new and used ice makers. Q doesn’t install or repair them.
Does Q install used equipment?
No. Other than walk-ins and hoods, Q doesn’t install equipment or do gas hookups.
Can I see used equipment before buying?
Yes. Visit our Irving showroom or call (945) 394-0396 to ask what’s in stock.
